- Rode Stereo VideoMic Pro On-Camera Microphone
- 9V rechargeable battery
Description
The Stereo VideoMic Pro provides a high-quality stereo option for videographers, and is ideal for recording music, and the atmospheric ambience essential in building a realistic audio scene. Based around a matched pair of high sensitivity ½" cardioid condenser capsules in a coincident XY pair, the Stereo VideoMic Pro provides a wide stereo image with natural depth. The integrated shock mounting system provides superior isolation from vibration and mechanical noise that can otherwise degrade the recording quality. Additionally, the lightweight yet robust multi-strand cable provides excellent acoustic decoupling from the camera and offers significantly lower noise transference than traditional audio cable.
Rode Stereo VideoMic Pro: Key Features
- Rode Stereo VideoMic Pro: Key Features
- Rycote Lyre shock mounting onboard
- Broadcast recording quality on-camera microphone
- All new matched pair 1/2" condenser capsules in XY stereo confi guration
- Improved foam windscreen
- Ultra lightweight, compact form factor
- On mic power and EQ controls
- Two step High Pass Filter (fl at, 75Hz)
- Three position level control (-10dB, 0, +20dB)
- 9V battery powered - over 100 hours use (alkaline)
- New Kevlar reinforced braided cable
- Billeted metal camera shoe mount with 3/8" thread for easy boompole mounting
Specifications
- Acoustic Principle: Pressure Gradient
- Active Electronics: JFET impedance converter
- Capsule: 0.50"
- Address Type: End
- Frequency Range: 40Hz - 20kHz
- Output Impedance: 200O
- Maximum SPL: 134dB SPL (@ 1kHz, 1% THD into 1KO load)
- Sensitivity: -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
- Equivalent Noise Level (A-weighted): 18dB-A
- Weight: 116gm
- Dimensions: 134mmH x 80mmW x 115mmD
Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
The Stereo VideoMic Pro, with its ergonomic form factor, make it perfectly suited to DSLR, consumer camcorders and large-sensor video cameras.
The user friendly designed rear of the microphone body features the power and equalisation controls, including a high pass filter at 75Hz which is designed to cut out the noise generated by air conditioning, traffic and other undesirable low frequency interference.
A -10dB PAD allows the user to reduce the sensitivity of the microphone, making it suitable for recording loud sound sources such as live music or at sporting events.
Like the VideoMic Pro, the Stereo VideoMic Pro features a +20dB level boost specifically designed to provide a higher quality signal with DSLR cameras. When activated, the typically low quality camera preamp level can be reduced, resulting in a lower noise floor and much clearer recording.