- RØDE RODE Boompole, 3 metre, 5 section Boom Pole
- Dead Wombat windshield
- Caring brush
- Tail/patch cable.
- MKH 416
- MZW 415 windshield
- MKH-416 case
Sennheiser MKH-416 P48U
Achieve superb audio capture in demanding conditions for your next professional film, TV, or location recording with the Sennheiser MKH 416-P48U3 moisture-resistant shotgun microphone. Mix-ready sound quality is provided by its sharp directivity, low noise, and strong output. Plus, there are no controls to worry about; the MKH 416-P48U3 delivers the reliability you need for high-pressure gigs.
The microphone exhibits a hypercardioid polar pattern at low to midrange frequencies and transitions to a lobar pattern in high frequencies, allowing it to attenuate 125 Hz to 2 kHz by approximately 10 dB at the 90° off-axis points. Your dialogue, foley, and sound effects can be recorded with full dynamics and clarity, thanks to the MKH 416-P48U3’s wide frequency response, enhanced consonant articulation, and high SPL handling.
Professional Sound Quality
The MKH 416-P48U3 was engineered with the experienced professional in mind. Its 40 Hz to 20 kHz frequency response incorporates a gentle rise from 5 to 15 kHz to increase intelligibility, and a natural bass roll-off to mitigate rumble. Its low self-noise of 13 dBA and high sensitivity of -32 dB enable studio-worthy signal purity without requiring noise reduction and gain boosting in postproduction.
The MKH 416-P48U3 boasts a transformerless and fully floating balanced output for optimal signal integrity. Thanks to its 3-pin XLR output and compliance with 44 to 52 VDC phantom power, the MKH 416-P48U3 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters, as well as built-in preamps on many camcorders and cinema cameras.
Ideal for Boompole Mounting
The MKH 416-P48U3’s metal body features a matte black finish to prevent distracting visual reflections. Mount the MKH 416-P48U3 directly on a stand or boompole using the supplied MZQ 100 clip. Alternatively, place the MKH 416-P48U3 in the separately available Sennheiser MZS 20-1 combination shockmount, pistol grip, and stand adapter to prevent the transfer of vibrations to the microphone.
Windscreen Minimizes Wind Noise
The MKH 416-P48U3 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in indoor or outdoor environments, consider the Sennheiser MZH 60-1 furry windshield (available separately).
RODE Boompole Pro, 3 metre, 5 section Boom Pole
The Boompole Pro is a precision-balanced professional boompole for location recording. Made from carbon fibre, the Boompole Pro is strong and ultra lightweight. It weighs just 535 grams and has a reach of 3 metres. It features an ergonomic grip and intuitive lock/release system that makes it easy to extend and retract.
- Ultra-lightweight carbon fibre construction
- 3m (10’) reach
- Easy-to-use lock/release mechanism
- Ergonomic grip for maximum comfort
RODE Blimp V2 (Blimp 2)Windshield and Rycote Shock Mount Suspension
The Blimp is the ultimate windshield and shock mounting system for RØDE shotgun microphones, as well as any third-party shotgun microphone up to 325mm in length. It features a Rycote® Lyre® suspension system for superior isolation from handling noise, plus an ultra-lightweight and ergonomic handle. Housed inside the grip is a heavy-duty Mogami® cable that splits via a junction box to a flexible thin cable inside the Blimp, which minimise the transference of vibration to the microphone.
The Blimp attaches to any standard boompole with a 3/8-inch thread attachment at the base. The Universal Blimp Mount is available as an option to remove the handle when the Blimp is being used primarily on a boompole. The Dead Wombat windshield, caring brush and tail/patch cable are included.
- Complete windshield and shock mount system for shotgun microphones
- Rycote® Lyre® suspension system for superior isolation from handling noise
- Ultra-lightweight design
- Attaches to any standard boompole